1ST REPAIR SIZE, 59.75mm. 2ND REPAIR SIZE MAY BE AVAILABLE UPON SPECIAL REQUEST. PLEASE CALL OR EMAIL TO ENQUIRE.Article code: v.nr.1080300140

1ST REPAIR SIZE, 59.75mm. 280SLArticle code: v.nr.1300300140

STANDARD SIZE 60mm. 250SLArticle code: v.nr.1080300040

STD. SIZE 60mm. 280SLArticle code: v.nr.1300300040

TO MOUNT MANIFOLDS TO CYLINDER HEAD. 6 PER CAR.Article code: v.nr.000835010052

250SE, 280SE COUPE & CONVERTIBLE

SHOULD PURCHASE # 42-2010 RESEVOIR MOUNTING KIT WHEN REPLACING MASTER CYLINDER

SHOULD PURCHASE # 226-020K RESEVOIR MOUNTING KIT WHEN REPLACING MASTER CYLINDER

Base seals are sold separately, Order two 42-2022 seals

230 Early 250SLSHOULD PURCHASE # 42-2010 RESEVOIR MOUNTING KIT WHEN REPLACING BRAKE RESEVOIR

ROUND RUBBER DISC WITH METAL INSERT IN MODULATOR VALVE ON PASSENGER SIDE OF TRANSMISSION. ALL 113s WITH AUTO TRANS.

ALL 113 SLS MOUNT IS FOR LEFT OR RIGHT SIDE. MOUNT ONLY - NO MOUNTING HARDWARE INCLUDED.

LEFT SIDE - FRONT OR REAR ORIGINAL EQUIPMENTIs Also a Transmission Mount for 230/250/280 sl’s.Article code: v.nr.1202230412

KIT CONTAINS LEFT & RIGHT MOUNTS ALONG WITH MOUNTING HARDWARE.

ORIGINAL EQUIPMENTArticle code: v.nr.1134911301

MUFFLER/EXHAUST CLAMP ALL 113 Chassis

REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION WITH CABLE. 230SL ONLY. NO LONGER SERVICED AT THIS PRESENT TIME.Article code: v.nr.0015458724

REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION BY CABLE. 250 & 280SL ONLY.Article code: v.nr.0015456724

NUT PICTURE MAY NOT REFLECT ACTUAL COLOR OR APPEARANCE

NUT - 8MM

Article code: v.nr.0009903250

Article code: v.nr.0019973345

MOUNTED NEXT TO RADIATOR, 280SL ONLY.

RUBBER HOSE WITH METAL ENDS FOR LOWER FITTING ON OIL COOLER TO METAL LINE THAT RUNS TO THE OIL FILTER HOUSING. 280SL UP TO ENG. # 10-001900 & 12-002829.Article code: v.nr.1301800082

RUBBER HOSE WITH METAL ENDS FOR LOWER FITTING ON OIL COOLER TO METAL LINE THAT RUNS TO THE OIL FILTER HOUSING. FOR 280SL FROM ENG. # 10-001901 TO 10-008192 & 12-002830 TO 010205.Article code: v.nr.1301870182

PART IS NO LONGER AVAILABLE. UPPER RUBBER HOSE WITH METAL ENDS FROM OIL COOLER TO METAL LINE THAT RUNS TO THE OIL FILTER HOUSING. 280SL UP TO ENG. # 10-001900 & 12-002829.Article code: v.nr.1141870282

RUBBER HOSE WITH METAL ENDS FROM UPPER OIL COOLER FITTING TO METAL LINE THAT RUNS TO THE OIL FILTER HOUSING. 280SL FROM ENG. # 10-001901 & 12-002830.Article code: v.nr.1301870282

COLLECTS VIRTUALLY ALL METAL PARTICULATE CONTAMINANTS NOT COLLECTED BY THE OIL FILTER TO THE TOP OF THE DRAIN PLUG SO OIL RETURNING TO THE CRANKCASE IS FREE FROM ABRASIVES. WHEN CHANGING YOUR OIL, SIMPLY WIPE OFF THE METAL PARTICLES FROM THE DRAIN PLUG.

M14x1.5×14 Magnetic Drain Plug for MercedesProtect your engine with this powerful magnetic drain plug. Typically, all of the V8 and V12 Mercedes engines until 1999 take this plug.COLLECTS VIRTUALLY ALL METAL PARTICULATE CONTAMINANTS NOT COLLECTED BY THE OIL FILTER TO THE TOP OF THE DRAIN PLUG SO OIL RETURNING TO THE CRANKCASE IS FREE FROM ABRASIVES.WHEN CHANGING YOUR OIL, SIMPLY WIPE OFF THE METAL PARTICLES FROM THE DRAIN PLUG.

BLACK PLASTIC "BAYONET" TYPE CAP. WE ALSO HAVE LIMITED ACCESS TO A METAL CAP WITH "OEL" IN RAISED LETTERS. IF REQUIRED, PLEASE INQUIRE EITHER BY EMAIL OR PHONE.Article code: v.nr.0000101285

ALL ENGINE BLOCK GASKETS & SEALS WITH V/C GASKET.Article code: v.nr.1300109608

FOR PLASTIC FILLER CAP ONLY. WILL COME AS PART OF NEW CAP.

OIL FILLER CAP GASKET

RUBBER RING SEAL IN TOP OF OIL FILTER CANNISTER ON TOP OF OIL FILTER CARTRIDGE.Article code: v.nr.0001843380

RUBBER SEAL AT BASE OF O/F CANNISTER.

LOWER STEEL SUMP PAN FOR 250SL FROM ENG. # 10-001176 & 12-001035. UPDATED PAN FROM ORIGINAL SO ORDER ADDITIONALLY 1 GASKET # 01-2049 AND 1 DRAIN PLUG # 01-2006.Article code: v.nr.1230100028