108 109 110 111 Chassis(1960-1972)
COMES WITH MASTER LINK 450SL/SLC WITH M117.982 & 985 ALL 560SL WITH M117.967
ALL METAL FILTER APPROXIMATELY 5.50 IN DIAMETER. WILL COME WITH PAN GASKET AND PLUG SEALS. FITS ALL 230SLs AND 250SLs WITH TRANS. # UP TO 006749 AND THEN WITH TRANS. # FROM 009936 UP TO 023010. AFTER THIS, USE KIT # 27-2010. W108/109/110/111/113
INJECTION POINT SET MOUNTED IN SIDE OF DISTRIBUTOR BODY. W/O WIRE CABLE. 450SL/SLC W/M117.982 UP TO 016343.
FOR 111 CHASSIS COUPES & CONVERTBLES ONLY. WILL NOT FIT 111 SEDANS.
This is a new cover under the dashboard (left), new and original packed Coupe / Cabriolet W 111 / W 112 220se,250se,280se,300se 111-112 2 door coupe and convertibles 1962-1968Currently no longer available at Mercedes
This is a new cover under the dashboard (right), new and original packed Coupe / Cabriolet W 111 / W 112 220se,250se,280se,300se 111-112 2 door coupe and convertibles 1962-1968Currently no longer available at Mercedes
URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL SOLD EACH 190SL PONTON 8 8
URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL SOLD EACH 8 Needed per Car
URETHANE FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm 2 2 early 2 late Front sway bar to frame - 23.85mm 2 2 late Front sway bar to frame - 20.34mm 2 2 early 2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.
URETHANE FRONT LEAF SPRING BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W110 (190/200/230) W111 (220/250/280) W113 (230/250/280SL) 4 4 4 4
URETHANE FRONT LEAF SPRING BUSHING QTY NEEDED PER CAR MODEL W109 (300/6.3) W112 (300) 4 4
URETHANE FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Rear sway bar to frame #112 326 01 81 early 6 Rear sway bar to frame #112 326 02 81 late 112 and 109 6 6 NOTE: Before selecting a rear sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.
URETHANE TRAILING ARM REAR (TO AXLE) QTY NEEDED PER CAR MODEL SOLD PER BUSHING SLEEVE NOT SOLD SEPERATELY W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 4 4
This repair part replaces leaking elements for vacuum locking.Article code: v.nr.728001
VALVE COVER TUBE - PLASTIC 230SL — Chassis 113.042 1963 - 1966 Base Convertible 2.3L L6 250SE — Chassis 111.023 1966 - 1967 Base Convertible 2.5L L6 250SE — Chassis 108/111 1966 - 1967 Base Coupe 2.5L L6 250SL — Chassis 113.043 1967 Base Convertible 2.5L L6 280SE — Chassis 108/111 1968 - 1969 Base All 2.8L L6
YEAR - MODEL vehicle attributes Quantity 280SE 1972 - 1973 1 280SEL 1972 - 1973 1 300SEL 1970 - 1973 1 450SE 1973 - 1975 1 450SEL 1973 - 1980 1 450SL 1973 - 1980 1 450SLC 1973 - 1980 1
