230sl 250sl 280sl front suspension parts

113 URETHANE SUSPENSION KIT (EARLY)

113 URETHANE SUSPENSION KIT (EARLY) 22 mm SWAY BAR THESE ARE BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXSISTING HARDWARE

US$347.76*

113 URETHANE SUSPENSION KIT (LATE)

20.34MM FRONT SWAY BAR LATE STYLE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

US$348.66*

113 URETHANE SWAY BAR KIT (EARLY)

22MM FRONT SWAY BAR EARLY KIT YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

US$54.00*

113 URETHANE SWAY BAR KIT (LATE)

20.34MM FRONT SWAY BAR LATE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

US$65.70*

BOLT

EXHAUST BOLT STABILIZER END LINK BOLT ALL113 Chassis

US$3.21*

CAP,STEERING

US$1.00*

ESAL RING,VL

Seal ring - Steering column to Steering Box for all W113 Pagoda models from 1963 to 1971

US$20.00*

FRONT SPRING

NOT AVAILABLE AT THIS TIME... PLEASE PROVIDE V.I.N.# IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT WHEN ORDERING.Article code: v.nr.1133210404

US$175.00*

FRONT WHEEL BEARING

For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815905

US$24.00*

FRONT WHEEL BEARING

For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815805

US$26.00*

FRONT WHEEL BEARING KIT

1 KIT FOR ONE WHEEL, 2 KITS NEEDED PER CARArticle code: v.nr.1073300051

US$48.00*

KING PIN KIT

Article code: v.nr.1115860033

US$215.00*

LOWER CONTROL ARM KIT

Article code: v.nr.1103300318

US$115.00*

POWER STEERING BELT

ALL MODELS WITH POWER STEERING. 13X750 1 PER CARArticle code: v.nr.0069970992

US$11.00*

POWER STEERING PUMP

FOR 1969-1971 280SL AND 1973-1975 450SL (117.982 UP TO 030108) LATE STYLE PUMP WITH TAPERED OR CONICAL SHAFT. IF INSTALLING ON A PRE-1969 VEHICLE OR ARE REPLACING A PUMP WITH THE CYLINDRICAL SHAFT, YOU MUST REPLACE THE PUMP PULLEY WITH PART # 46-2120B.

From US$475.00*

Details

RUBBER FRONT SWAY BAR END LINK BUSHING

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 8 8 8 8 8 8

US$16.00*

RUBBER FRONT SWAY BAR TO FRAME

RUBBER FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm 2 2 early 2 late Front sway bar to frame - 23.85mm 2 2 late Front sway bar to frame - 20.34mm 2 2 early 2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.

From US$12.50*

Details