108 109 111 CHASSIS

The 123/MERCEDES-4-R is designed for the W110, W115 and W123 engines WITHOUT vacuum advance and is therefor the 123ignition to use in the Mercedes 190 SL and the Mercedes Ponton. This 123ignition can also be used in the Mercedes 190C, 200, 220, 220US and 230 (all without vacuum advance). Next to the standard-curves, it offers optimised advance-curves for driving on LPG or E85, the new Bio-Ethanol-fuel of the future.

The 123/MERCEDES-4-R is designed for the W110, W115 and W123 engines WITHOUT vacuum advance and is therefor the 123ignition to use in the Mercedes 190 SL and the Mercedes Ponton. This 123ignition can also be used in the Mercedes 190C, 200, 220, 220US and 230 (all without vacuum advance). Next to the standard-curves, it offers optimised advance-curves for driving on LPG or E85, the new Bio-Ethanol-fuel of the future.

The 123/MERCEDES-6-R-V-OLD is designed for pre-1962 6 cylinder engines. This 123ignition can be used in the Mercedes 180, 219, 220, 300 & 300SL (please check Bosch distributor numbers).  The 123/MERCEDES-6-R-V is designed for W108, W109, W110, W111, W112, W113, W114, W123 and W130 6 cylinder engines, in the Mercedes: 220, 230, 230S, 230SL, 250, 250SL, 250SE, 250CE, 280, 280S, 280SE, 280SL, 300SE, 300SEL and 300SEb.

The 123/MERCEDES-6-R-V-OLD is designed for pre-1962 6 cylinder engines. This 123ignition can be used in the Mercedes 180, 219, 220, 300 & 300SL (please check Bosch distributor numbers).  The 123/MERCEDES-6-R-V is designed for W108, W109, W110, W111, W112, W113, W114, W123 and W130 6 cylinder engines, in the Mercedes: 220, 230, 230S, 230SL, 250, 250SL, 250SE, 250CE, 280, 280S, 280SE, 280SL, 300SE, 300SEL and 300SEb.

280SL 350SL 380SL 450SL 500SL 560SL 350SLC 450SLC 500SLC SEDANS, COUPES & CONVERTIBLES PARTS CATALOG

All are 107 Chassis NumberArticle code: v.nr.107KIT

Article code: v.nr.107SLC

107 CHASSIS SOFT TOP FRAME RUBBER KIT

REPLACEMENT PLASTIC DASH COVER, without climate sensor INSTALLED OVER EXISTING DASH, PERFECT FIT, COMES WITH GLUE AND MOUNTING INSTRUCTIONS. Due to the size shipping cost is approximately $40 in the continenal USA.

FITS EARLY 450SL/SLC UP TO ENGINE # 117.982.12.030108ALL WITH SEPARATE RESERVOIR FOR POWER STEERING PUMP WHICH WILL BE UP TO +/- END OF 1973. KIT CONTAINS FILTERS FOR AIR, OIL, FUEL, POWER STEERING, AND TRANSMISSION.

FOR 450SL/SLC FROM +/- 1973 THRU 1975 END. FROM ENGINE # 117.982.12.030109 THRU 117.982 END. ALL WITH RIGID AIR FILTER & POWER STEERING FLUID RESERVOIR AS PART OF P/S PUMP. KIT CONTAINS FILTERS FOR AIR, OIL, FUEL, POWER STEERING, & TRANSMISSION.

450SL/SLC FROM 1976 THRU 1980 WITH FLEXIBLE AIR FILTER. ALL 450SL/SLC WITH CIS FUEL INJECTION. KIT CONTAINS FILTERS FOR AIR, OIL, FUEL, POWER STEERING, AND TRANSMISSION.

FOR 450SL/SLC FROM +/- 1973 THRU 1975 END. FROM ENGINE # 117.982.12.030109 THRU 117.982 END. ALL WITH RIGID AIR FILTER & POWER STEERING FLUID RESERVOIR AS PART OF P/S PUMP. KIT CONTAINS FILTERS FOR AIR, OIL, FUEL, POWER STEERING, & TRANSMISSION.

KIT CONTAINS FILTERS FOR AIR, OIL, FUEL, POWER STEERING, & TRANSMISSION.

All are 107 Chassis NumberArticle code: v.nr.107KITOE

107 Side Molding Kit

 107 CONVERTIBLE TOPS MANUAL

450SL/SLC FROM ENG. # 117.985.12.052868 THRU 380SL/SLC END EXCEPT FOR 380SL/SLC 1981 ONLY. FOR 1981 380SL/SLC, SEE KIT # 00-3065. KIT CONTAINS DISTRIBUTOR CAP, ROTOR, 8 COPPER CORE SPARK PLUGS, & IGNITION WIRE SET WITH COIL WIRE.

FOR 380SL/SLC 1981 ONLY! FOR OTHER YEAR 380SL/SLCs, SEE KIT # 00-3060. KIT CONTAINS DISTRIBUTOR CAP, ROTOR, 8 COPPER CORE SPARK PLUGS, & IGNITION WIRE SET WITH COIL WIRE.

KIT CONTAINS DISTRIBUTOR CAP, ROTOR, 8 COPPER CORE SPARK PLUGS, & IGNITION WIRE SET WITH COIL WIRE.

450SL/SLC UP TO ENG. # 117.982.12.019173. ALL EARLY ENGINES WITH POINTS IN DISTRIBUTOR. KIT CONTAINS DISTRIBUTOR CAP, ROTOR, POINTS, 8 COPPER CORE SPARK PLUGS, & IGNITION WIRE SET WITH COIL WIRE.