SOLD PER EACH

RUBBER BOOT ON STEERING COLUMN FOR SWITCH # 46-2068. ALL 230SLs AND 250SLs UP TO CHASSIS # 002979.

RUBBER BOOT ON STEERING COLUMN FOR SWITCH # 46-2069. 250SLs FROM CHASSIS # 002980 ALL 280SLs.

 BRAKE CYLINDER GROMMET

USED ON EARLY 230SL UP TO 10-010786. MOLDED RUBBER HOSE FOR V/C BREATHER.

MOLDED RUBBER BREATHER HOSE MOUNTED ON TOP OF V/C AND CONNECTS WITH PLASTIC BREATHER PIPE THAT FOLLOWS TO THE AIR INTAKE.

TWO METERS REQUIRED FOR ALL 4 GUARDS.

CALIPER BLEEDER VALVE RUBBER CAP

COWL VENT SEAL

SEAL FOR FRONT OF DOOR GLASS TO W/SHIELD PILLAR. 2 PER CAR, SAME LEFT & RIGHT.

SEALS TOP & BACK OF DOOR GLASS ON DRIVERS SIDE. SAME SEAL FOR HARD OR SOFT TOP. CUT TO FIT FOR SOFT TOP.

SEALS TOP & BACK OF DOOR GLASS FOR PASSENGER SIDE. FITS BOTH SOFT & HARD TOPS, CUT TO FIT FOR SOFT TOP.

REPRODUCTION SEAL FOR FRONT OF DOOR GLASS TO W/SHIELD PILLAR. 1 EACH, SAME FOR LEFT OR RIGHT. TRIM TO FIT.

1 SET DOES BOTH EXTERIOR DOOR HANDLES

3 SIDED FORMED SEAL FOR DRIVERS DOOR TO BODY. SEALS FRONT, BOTTOM, AND BACK OF DOOR.

3 SIDED FORMED SEAL FOR PASSENGER SIDE DOOR TO BODY. SEALS FRONT, BOTTOM, AND BACK OF DOOR.

FORMED RUBBER SEAL FOR EURO H/L ASSY. TO BODY. SAME LEFT OR RIGHT, 2 PER CAR.

RUBBER SEAL FOR EURO H/L GLASS LENS TO H/L ASSY.

FIREWALL GROMMET KIT

SPONGE RUBBER FILLER NECK GROMMET LOCATED UNDER TRUNK FLOOR TO BUFFER TANK.

RUBBER GROMMET ON REAR BODY PANEL WHERE FUEL TANK NECK EXTENDS THROUGH THE REAR BODY PANEL.

230SL 250SL 280SL ALLCONTAINS ALL RUBBER SEALS FOR HARDTOP TO BODY AS WELL AS ALL GLASS SEALS ON HARDTOP.

all Models ReplacementROUND RUBBER PLUG ON TOP OF FIREWALL NEXT TO HOOD LATCH. REMOVAL GAINS ACCESS TO MANUALLY OPERATE VALVE ON HEATER CORE.

BLACK RUBBER TRIANGULAR SHAPED BUFFER MOUNTED ON THE INNER FENDER WELL TO SUPPORT THE HOOD TO BODY WHEN HOOD IS IN THE DOWN POSITION. 4 PER CAR FOR ALL 180s, 190s, 220S, 220SEs, SEDANS, COUPES, AND CONVERTIBLES. 2 PER CAR FOR ALL 107S, 108S, 109S