BOWDRILL COVERING - SOFT TOP FRAMEOriginal - Per YardTo cover the Soft Top Frame

1965-1989 BRAKE WINCH HOIST

SL 113 M4 Chrome Screw For Soft Top Wire

CONVERTIBLE TOP SIDE TENSION CABLE

SEALS TOP & BACK OF DOOR GLASS ON DRIVERS SIDE. SAME SEAL FOR HARD OR SOFT TOP. CUT TO FIT FOR SOFT TOP.

SEALS TOP & BACK OF DOOR GLASS FOR PASSENGER SIDE. FITS BOTH SOFT & HARD TOPS, CUT TO FIT FOR SOFT TOP.

JOINT COVER ON EITHER SIDE OF HARDTOP ABOVE DOOR GLASS. 2 PER CAR.

FOR ALL 230SL 250SL 280SL FROM 1963 TO 1971. THIS IS A CUSTOM MADE TOP WITH ALL THE EDGES ROLLED AND FINISHED AS THEY ORIGINAL COME FROM THE FACTORY. GERMAN CANVAS TOP

Chrome Soft Top handle

HARD TOP HANDLE PARTS KIT

230SL 250SL 280SL ALLCONTAINS ALL RUBBER SEALS FOR HARDTOP TO BODY AS WELL AS ALL GLASS SEALS ON HARDTOP.

PART NOT AVAILABLE AT THIS TIME. DRIP MOULDING JOINT COVER, FRONT CENTER OF HARDTOP.

ALL 113 CHASSIS - 230SL 250SL 280SLSPECIFY COLOR. GRAY, OFF-WHITE/LIGHT BEIGE, OR TAN

HARDTOP HOIST - ELECTRIC MOTOR

Works on 113 and 107 cars.

Works on 113 chassis cars An additional charge of $40.00 will be added for bulk shipping Can be used in counjunction with your electric drill for electric functionality The Easy Hoists hardtop hoist system consists of a unique, patented cradle which cleverly supports and counter-balances the hardtop and allows it to be safely stored in the raised position near the ceiling of your garage, a manual wormgear winch which cannot slip, aircraft grade wire rope, and a set of high quality pulleys and fixings.  Anyone who has tried to remove and fit a hardtop manually will know what a struggle it can be. The Easy Hoists hardtop hoist system makes the job of fitting and removing your hardtop a simple operation which is usually possible with just one person. There is no physical strength required on the part of the operator since the winch does all the work.  The hardtop hoist is available for many OEM hard tops The hardtop hoist cradle is custom fitted for each model of car The hardtop hoist supports your hard top at strategic locations to prevent warping or bending of the hard top No complicated procedures for attaching or detaching the hardtop hoist apparatus Easy operation equals greater safety Does not touch rubber seals Protecting the rubber seals while stored prevents wind noise, water seepage, etc. after the hard top is refitted to the car body Safely remove, store and replace your hard top  *** PLEASE  NOTE *** All hoists are currently being finished in bare aluminium rather than finished in black. The pictures are for illustration only rather than the actual item. All hoists sold here are brand new, boxed items. NOT RESPONSIBLE FOR DAMAGES OR EXPENSES INCURRED DUE TO IMPROPER INSTALLATION AND OR USAGE!!!

GRAY UPPPER BUSHING IN HARDTOP LOCK SET NEXT TO 1/4 WINDOWS. 2 PER CAR. FOR LOWER WHITE CONE SHAPED BUSHING, SEE PART # 79-2035.

COMPLETE LOCK KIT FOR LEFT SIDE. CONTAINS HANDLE, BUSHINGS, SEALS, & LOCK PIN AND SLEEVES.

COMPLETE REPLACEMENT KIT FOR LOCK BELOW 1/4 WINDOW FOR RIGHT SIDE. CONTAINS, HANDLE, BUSHINGS, SEALS, LOCK PIN & SLEEVES.

LOWER WHITE CONE SHAPED BUSHING FOR HARDTOP LOCK. FITS BOTH SIDES, 2 PER CAR. FOR UPPER GRAY BUSHING, SEE PART # 79-2034.

All SLs - 1963 to 2002 Mercedes Original Hard Top Storage Rack

SMALL ROUND RUBBER SEAL AT CENTER REAR HARDTOP BASE TO SEAL REAR LOCKING PIN ON HARDTOP TO LOCK IN BODY.

JOINS MOULDING HALVES ABOVE HARDTOP REAR WINDOW.

FELT COVERED RUBBER SEAL MOUNTED ON HARDTOP BASE. SEALS HARDTOP TO BODY.