BLINKER SWITCH
US$900.00*
COMBINATION SWITCH (TURN SIGNAL, WIPERS, HIGH BEAM FLASHING)
FOR ALL 230SLs AND 250SL UP TO CHASSIS # 002979.
BLINKER SWITCH
US$1,000.00*
BLINKER SWITCH Late 250 280SL
COMBINATION SWITCH (TURN SIGNALS, WIPERS, HIGH BEAM FLASHER)
250SL FROM CHASSIS # 002980 AND ALL 280SLs.
COLD START VALVE SOLENOID
US$379.55*
NOT AVAILABLE REPLACEMENT SOLENOID FOR COLD START VALVE # 07-2014A & B. WILL NOT FIT # 07-2014C. SEAL NOT INCLUDED BUT CAN BE PROVIDED FOR AN ADDITIONAL $ 30.00. IF REQUIRED, PLEASE REQUEST IN THE SHIPPING INSTRUCTIONS BOX AT CHECK-OUT.
FLASHER KNOB
US$1.00*
NO LONGER AVAILABLE !! FOR REPLACEMENT SWITCH ONLY # 82-2201 THIS PART IS NO LONGER AVAILABLE AT THIS TIME.
FLASHER RELAY
US$110.00*
ALL 230 & 250SLs AND 280SL UP TO CHASSIS # 005607.
REPLACEMENT UNIT AS ORIGINAL IS NO LONGER AVAILABLE.
MINOR WIRING CHANGE REQUIRED, #2 wire to 49A, #3 wire to 49, #4 wire to 31.
FLASHER SWITCH
US$174.00*
HAZARD FLASHER SWITCH. REPLACEMENT SWITCH AS ORIGINAL SWITCH IS NO LONGER AVAILABLE. ORDER ALSO 1 KNOB # 82-2202.
%
FOOT DIMMER SWITCH
US$160.00*
US$175.00*
(8.57% saved)
FOOT OPERATED SWITCH IN DRIVERS FOOTWELL TO TURN HIGH BEAMS EITHER ON OR OFF.
HORN - HIGH TONE
US$38.00*
REPLACEMENT DISC TYPE. WHEN REPLACING ORIGINAL HORNS, BEST TO REPLACE BOTH HORNS AS A PAIR.
HORN - LOW TONE
US$38.00*
REPLACEMENT DISC STYLE. WHEN REPLACING ORIGINAL HORNS, BEST TO REPLACE BOTH HIGH AND LOW TONES.
%
INTERIOR LIGHT SWITCH
US$48.00*
US$56.00*
(14.29% saved)
CONTACT SWITCH MOUNTED IN FRONT DOOR JAMB TO OPERATE INTERIOR COURTESY LAMP UNDER DASH.
NEUTRAL SAFETY SWITCH
US$275.00*
REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION WITH CABLE. 230SL ONLY. NO LONGER SERVICED AT THIS PRESENT TIME.
NEUTRAL SAFETY SWITCH
US$409.43*
REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION BY CABLE. 250 & 280SL ONLY.
TIME LAG RELAY
US$234.00*
PART NOT AVAILABLE AT THIS TIME. PART OF THR HOT START MODIFICATION. ALLOWS FOR A 1 SECOND FUEL DISCHARGE FROM THE COLD START VALVE IN WARM ENGINES TO IMPROVE HOT START. IF NOT PREVIOSLY INSTALLED, WILL ALSO NEED HARNESS # 54-2132.