108 URETHANE SUSPENSION KIT
US$347.76*
108 URETHANE SUSPENSION KIT
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
109 URETHANE SUSPENSION KIT
US$661.86*
109 URETHANE SUSPENSION KIT
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
110 URETHANE SUSPENSION KIT
US$348.66*
110 URETHANE SUSPENSION KIT
BUSHINGS ONLY, YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
111 RUBBER SUSPENSION KIT (EARLY)
US$326.02*
20.34MM FRONT SWAY BAR BUSHING
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
111 RUBBER SUSPENSION KIT (LATE)
US$326.02*
22MM FRONT SWAY BAR BUSHING
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
111 URETHANE SUSPENSION KIT (EARLY)
US$348.66*
20.34MM FRONT SWAY BAR BUSHING
URETHANE SUSPENSION KIT (EARLY)
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
111 URETHANE SUSPENSION KIT (LATE)
US$347.76*
22 MM FRONT SWAY BAR BUSHING
URETHANE SUSPENSION KIT (LATE)
BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE
112 URETHANE SUSPENSION KIT (LATE)
US$661.86*
22MM FRONT SWAY BAR
112 URETHANE SUSPENSION KIT (LATE)
BUSHINGS ONLY YOU WILL NEED TO USE YOUR EXISTING HARDWARE
IDLER ARM REPAIR
US$36.26*
IDLER ARM REPAIR KIT from Early 280SL W113 Chow in pic for reference
FITS ALL 280SLs FROM CHASSIS # 000019 EXCEPT FOR 000091 & 000108.
Is also used on the following chassis
107 108 109 111 113 114 115 116 123 126
INNER CONTROL ARM SEAL
US$6.18*
It is the inner control arm seal rings for 1950’s to 1970’s cars. Priced Each. There are 8 per Car
POWER STEERING BOX
US$775.00*
EXCHANGE REBUILT BOX ASSY. WILL FIT ALL 6 CYL MODELS.
4.5 V-8s AVAILABLE UPON SPECIAL REQUEST
3.5 MODELS ARE NOT AVAILABLE.
PLEASE PROVIDE VEHICLE I.D. NUMBER IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT.
RUBBER FRONT SWAY BAR END LINK BUSHING
US$16.00*
URETHANE FRONT SWAY BAR END LINK BUSHING
QTY NEEDED PER CAR MODEL
W108 (250/280)
W109 (300/6.3)
W110 (190/200/230)
W111 (220/250/280)
W112 (300)
W113 (230/250/280SL)
8
8
8
8
8
8
RUBBER FRONT SWAY BAR TO FRAME
US$12.50*
RUBBER FRONT SWAY BAR TO FRAME
QTY NEEDED PER CAR MODEL
W108 (250/280)
W109 (300/6.3)
W110 (190/200/230)
W111 (220/250/280)
W112 (300)
W113 (230/250/280SL)
Front sway bar to frame - 22mm
2
2 early
2 late
Front sway bar to frame - 23.85mm
2
2 late
Front sway bar to frame - 20.34mm
2
2 early
2 late
NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler.
With Calipers
With flexible tape
If using an inch tape – take measurement and divide by 3.142 to get the diameter.
To convert from inches to mm, simply multiply by 25.4.
In both cases, this sway bar measures 24mm.
