7 PER TRANSMISSION, AUTOMATIC ONLY

O-RING SEAL FOR TRANS. FRONT OIL PUMP TO TRANS. BODY. 117 X 3.5 mm.

INPUT SHAFT SEAL ON AUTO. TRANSMISSION. 34x52x8 mm.

REMOVABLE GRILL PLATE ON BOTTOM OF BELL HOUSING. HELD WITH 2 SCREWS. ALL WITH AUTOMATIC TRANSMISSION.

FOR ALL MODELS WITH AUTO TRANSMISSION AND A FLOOR SHIFT.

LEVER,TRANSMISSION

THIS PART IS NOT AVAILABLE AT THIS TIME. ROUND RUBBER DISC WITH METAL INSERT IN MODULATOR VALVE ON PASSENGER SIDE OF TRANSMISSION. ALL 113s WITH AUTO TRANS.

LEFT SIDE - FRONT OR REAR ORIGINAL EQUIPMENTIs Also a Transmission Mount for 230/250/280 sl’s.

REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION WITH CABLE. 230SL ONLY. NO LONGER SERVICED AT THIS PRESENT TIME.

REVERSE LIGHT/START INHIBITOR SWITCH MOUNTED ON FIREWALL CONNECTED TO TRANSMISSION BY CABLE. 250 & 280SL ONLY.

YOKE/FLANGE ON REAR OF TRANSMISSION. SAME FOR AUTO. & STANDARD SHIFT.

OUTPUT SHAFT SEAL. ALL 113s AUTOMATIC TRANSMISSION.

ALL 113s WITH AUTO. TRANSMISSION.CABLE FOR NEUTRAL SAFETY SWITCH TO TRANSMISSION.

14mm Aluminium Washer

PLASTIC BUSHING ON BOTH ENDS OF SELECTOR ROD GOING FROM SHIFT LEVER HOUSING TO SIDE OF TRANSMISSION. 2 PER CAR, AUTOMATIC TRANSMISSION ONLY.

230SL 250SL 280SL

BLACK - AUTOMATIC TRANSMISSION

all Models Automatic except early 230slNEW, CHROME, SPLINED TOP FOR KNOB. FOR 230SL FROM CHASSIS # 013330 THRU 280SL END.

BUSHING ON EITHER SIDE OF SHIFTER HOUSING CUP FOR AUTOMATIC SHIFTER SELECTOR. 2 PER CAR FOR 230SL FROM 12-013330 THRU 250 & 280SL ALL WITH AUTO TRANS.

TACHOMETER CABLE ALL 113 MODELS RHD W/1950MM Length

ALL METAL FILTER APPROXIMATELY 5.50 IN DIAMETER. WILL COME WITH PAN GASKET AND PLUG SEALS. FITS ALL 230SLs AND 250SLs WITH TRANS. # UP TO 006749 AND THEN WITH TRANS. # FROM 009936 UP TO 023010. AFTER THIS, USE KIT # 27-2010. W108/109/110/111/113

METAL FILTER WITH PAPER INSERT APPROX. 6.75" IN DIAMETER. 230 & 250SL FROM TRANS. # 006750 UP TO 009935 AND THEN FROM 023011 THRU 280SL END.

SAME LEFT & RIGHT. RUBBER HOSE WITH METAL FITTINGS ON BOTH ENDS, RADIATOR SIDE WITH 90 DEGREE ANGLE. METAL COIL REINFORCEMENT. 10" LENGTH, FROM RADIATOR TO METAL LINE TO TRANSMISSION.