Late 280SLPAPER GASKET WITH 3 SCREW HOLES TO SEAL THE COLD START VALVE TO THE INTAKE MANIFOLD. LATE 280SLs ONLY.

RUBBER O-RING THAT SEALS THE COLD START VALVE ASSY. TO THE INTAKE MANIFOLD.

CYLINDER HEAD GASKET Mercedes-Benz 230SL   year  vehicle attributes  1963   1964   1965   1966   Mercedes-Benz 250SE   year  vehicle attributes  1966 111.021 L6 2.5L 129.980  1966 111.021 L6 2.5L 129.981  1967 111.021 L6 2.5L 129.980  1967 111.021 L6 2.5L 129.981  1967   1968 111.021 L6 2.5L 129.980  1968 111.021 L6 2.5L 129.981  Mercedes-Benz 250SL   year  vehicle attributes  1967 129.982 Automatic  1967 129.982 Manual  1968 113.043 L6 2.5L 129.982 

HEAD GASKET W108 W109 W113 280 model from 1967 to 1971

COPPER CRUSH RING FOR 26mm OIL DRAIN PLUG. USED ON ALL MODELS WITH ORIGINAL OIL PAN.

USED WITH REPLACEMENT OIL PAN ON 250SLs FROM ENG. # 10-001176 & 12-001035 AND ALL 280SLs. ONLY FOR SMALL DRAIN PLUG FOR REPLACEMENT OIL PANS.

PREFORMED FRONT ENGINE SEAL. SHOULD ALSO REPLACE THE COLLAR SPACER RING # 03-2006 WHEN REPLACING THIS SEAL. ANY BURRS ON OLD COLLAR WILL CAUSE IMMEDIATE FAILURE OF NEW SEAL.

Pad for Fuel Filler Neck for SL 107 Models 280/350/380/420/450 SLC 107 Models 280/350/380/450 SL 113 Models 230/250/280 from 1963 to 1985

VALVE GASKET 3 HOLE W113 280 Model from 1967 to 1971 SL107/SLC 107 280 from 1974 to 1980

 VALVE GASKET 6 HOLE W113 Models from 1963 to 1971 SL107/SLC 107 280 from 1974 to 1980 

FITS ALL 230 & 250SLs. DOES NOT INCLUDE V/C GASKET # 01-2053 & VALVE SEALS # 05-2075 OR 05-2073.

FOR 280SL UP TO ENGINE # 10-004596 & 12-007229. DOES NOT INCLUDE V/C GASKET # 01-2053 OR VALVE SEALS # 05-2074.

from Early 280SLLATER 280SL FROM ENG. # 10-004597 & 12-007230. WILL NOT INCLUDE V/C GASKET # 01-2053 OR VALVE SEALS # 05-2074.

PAPER GASKET LOCATED BETWEEN THROTTLE BODY AND INTAKE MANIFOLD.

ALL ENGINE BLOCK GASKETS & SEALS WITH V/C GASKET.

ALL ENGINE BLOCK GASKETS & SEALS WITH V/C GASKET.

OIL FILLER CAP GASKET

RUBBER SEAL AT BASE OF O/F CANNISTER.

FOR 230SL & 250SL UP TO ENG. # 10-001175 & 12-001035.

P/S PUMP CAP GASKET 113 CH

THREADED PLUG  Crankcase M42 X 1.5  Fits many Different Models 117 Shown in picture Be sure to check via MB 1179970230 

RUBBER GASKET/SEAL FOR BETWEEN VALVE COVER AND CYLINDER HEAD.